Requires approximately 12oz. per foot diameter of planting hole.

Click Here for a full spec. sheet.

PHC Palm Saver 6-3-6 (8 lb bag) is used in establishing or maintaining palms and tropical plants. It contains a blend of VA endomycorrhizal fungal spores, beneficial rhizosphere bacteria, 6-3-6 biofertilizer, organic amendments and a comprehensive selection of micronutrients. PHC Palm Saver is designed to restore soil fertility and address the mineral requirements common to tropical plants.

• Provides a sustainable supply of nitrogen, phosphorus, and other basic minerals necessary for continuing active plant development
• Increases absorption and transfer of water and mineral nutrients from the soil to the plant
• Helps plants mitigate adverse environmental conditions, such as drought, soil salinity and extremes of soil pH

NEW PLANTINGS: Mix PHC Palm Saver in the backfill around the root ball in the top 4 inches of soil. For each 1 foot diameter of planting hole, use 12oz. of PHC Palm Saver.

VERTIMULCHING EXISTING PALMS: Apply by standard vertical mulching technique: For an average sized palm, drill 4 holes evenly spaces around the trunk about half way between trunk and dripline. Remove mulch. Use a 2 to 3 inch wide auger to drill holes to a depth of 8 to 10 inches. Fill holes with soil evenly mixed with PHC Palm Saver at a rate of 6oz. per hole, and pack lightly. If using premixed soil as fill, mix 10 lbs. of PHC Palm Saver per cubic foot of fill. Replace mulch, apply water to saturation. Reapply annually as needed.

Size	1 gallon plant	3 gallon plant	5 gallon plant	10 gallon plant
Rate	3 ounces	6 ounces	12 ounces	18 ounces

Size	15 gallon plant	2 foot diameter planting hole	3 foot diameter planting hole	5 foot diameter planting hole
Rate	24 ounces	24 ounces	36 ounces	72 ounces